User Guide
| 1. | Before laying of the tiles finish the surface of the floor with wood float finish and complete the rendering and curing at least two weeks prior to laying, please note that Do not fix tiles on fresh surface. |
| 2. | Check a few boxes before laying to satisfy yourself about the color variation, also make sure that the design pattern and the arrow marked on the back side of tiles must be in the same direction, please note that a certain amount of shade variation and size variation are inherent characteristics of ceramic products and the company will not bear any responsibility once tiles are fixed. |
| 3. | To fix Porcelain Tiles on the floor conventional sand cement can be used but it is advisable to use tile fixing adhesives only for wall application. Also note that regarding the use of fixing media, all the instructions provided along with the must be followed, Do not use neat cement. |
| 4. | Porcelain tiles are specially rectified tiles and since they have very low moisture and thermal expansion they can be laid without joints it is not necessary to leave gaps between two tiles. But for better aesthetic value and for guaranteed use, providing spacer in between the tiles is recommended. At the time of laying do not use an iron hammer or some heavy material to press the tile. |
| 5. | After fifteen minutes of the fixation tiles should be wiped with a damped sponge and cleaned the tiles with a soft dry cloth. |
| 6. | Company does not bear any liability for problems arising out of non fulfillment of the tile fixing instructions. |
| 7. | To clean the tiles use water or diluted soap solution followed by water with soft cloth or sponge. Do not rub hard or scratch on the surface. |
NOTHING IN THESE INSTRUCTIONS CAN SUBSTITUTE GOOD WORKMANSHIP AND SUPERVISION |

